Call 954-667-7787
South Floridas Residential & Commercial Painters.
Bringing Your Style To Life
Paint products we use for exterior
3 to 1 waterbased sealer
Sherwin williams concrete patch
3 to 1 waterbased sealer
We first use a 3 to 1 sealer so that the exterior is probarly sealed and so the paint has something to bond to.
Latitude
Sherwin williams concrete patch
3 to 1 waterbased sealer
Than secondly we use two coats of Latitude satin and semi-gloss for exterior homes and buildings.
Sherwin williams concrete patch
Sherwin williams concrete patch
Sherwin williams concrete patch
We use this concrete patch from sherwin williams to patch any cracks or holes on the exterior of homes and buildings
Paint products and steps we use for interior painting
Pro industrial
Promar 200 egg-shell
Promar 200 egg-shell
We use this paint on Doors, Door frames, Baseboards, and Crown molding, anything that requires a semi-gloss finish.
Promar 200 egg-shell
Promar 200 egg-shell
Promar 200 egg-shell
ProMar 200 egg-shell is what we use for interior walls it is a zero voc paint.
.jpg/:/cr=t:5.6%25,l:0%25,w:100%25,h:88.8%25/rs=w:365,h:365,cg:true)
Promar 200 Flat
Promar 200 egg-shell
SuperPaint Satin
ProMar 200 with a flat finish is what we use for interior celings.
.jpg/:/cr=t:4.18%25,l:0%25,w:100%25,h:91.63%25/rs=w:365,h:365,cg:true)
SuperPaint Satin
Promar 200 egg-shell
SuperPaint Satin
SuperPaint Satin is another zero voc paint that we use for interior walls.
123 Primer
Joint Compound
123 Primer
when we do patches on interior walls we sand and than we put a coat of primer so the paint will stick to the patch and last longer.
Kilz
Joint Compound
123 Primer
We use kills if there is any water stains on celings or if there are any stains in general on interior walls and celings.
Joint Compound
Joint Compound
Joint Compound
We use a 45 miniute joint compound to patch any interior cracks or holes after it dries we sand the patches and prime them.
How we paint new drywall
First we use primer
Finally we put two coats of paint
First we use primer
Why do we use primer ?
We use primer to seal the new drywall and to allow the paint to bond better to the wall. This increases the life and color of the paint.
Second we sand
Finally we put two coats of paint
First we use primer
What's the purpose of sanding ?
We sand all new walls after we prime to make sure the walls are completely smooth and to make sure they feel brand new.
Finally we put two coats of paint
Finally we put two coats of paint
Finally we put two coats of paint
What's the purpose of two coats ?
We always do two coats of paint we will cut twice and roll twice making sure the entire wall is covered with a thick coat of paint.